Active control of large amplitude vibrations of smart magneto–electro–elastic doubly curved shells

This paper deals with the analysis of active constrained layer damping (ACLD) of large amplitude vibrations of smart magneto–electro–elastic (MEE) doubly curved shells. The constraining layer of the ACLD treatment is composed of the vertically/obliquely reinforced 1–3 piezoelectric composite (PZC). The constrained viscoelastic layer of the ACLD treatment is modeled by using the Golla–Hughes–McTavish method in the time domain. A three-dimensional finite element model of the overall smart MEE doubly curved shells has been developed taking into account the effects of electro–elastic and magneto–elastic couplings, while the von Kármán type nonlinear strain displacement relations are used for incorporating the geometric nonlinearity. Influence of the curvature ratio, the curvature aspect ratio, the thickness aspect ratio on the nonlinear frequency ratios of the MEE doubly curved shells has been investigated. Effects of the location of the ACLD patches and the edge boundary conditions on the control of geometrically nonlinear vibrations of paraboloid and hyperboloid MEE shells have been studied. Particular attention has been paid to investigate the performance of the ACLD treatment due to the variation of the piezoelectric fiber orientation angle in the 1–3 PZC constraining layer of the ACLD treatment.     

An efficient memetic algorithm for 3D shape matching problems

Shape representation plays a vital role in any shape optimization exercise. The ability to identify a shape with good functional properties is dependent on the underlying shape representation scheme, the morphing mechanism and the efficiency of the optimization algorithm. This article presents a novel and efficient methodology for morphing 3D shapes via smart repair of control points. The repaired sequence of control points are subsequently used to define the 3D object using a B-spline surface representation. The control points are evolved within the framework of a memetic algorithm for greater efficiency. While the authors have already proposed an approach for 2D shape matching, this article extends it further to deal with 3D shape matching problems. Three 3D examples and a real customized 3D earplug design have been used as examples to illustrate the performance of the proposed approach and the effectiveness of the repair scheme. Complete details of the problems are presented for future work in this direction.     

Effect of Thermal Cycling on Creep Behavior of Powder-Metallurgy-Processed and Hot-Rolled Al and Al-SiC Particulate Composites

The tensile creep behavior of powder metallurgy (P/M)–processed and hot-rolled commercially pure Al and Al-5 or Al-10 vol pct SiC particulate composites has been evaluated after subjecting to 0, 2, and 8 thermal cycles between 500 °C and 0 °C with rapid quenching. The images of microstructures obtained using scanning and transmission electron microscopy as well as changes in the electrical resistivity, Young’s modulus, and microhardness have been examined in the samples subjected to thermal cycling, in order to compare the effects of structural damage and strengthening by dislocation generation. The damage is caused by voids formed by vacancy coalescence, and is more severe in pure Al than in Al-SiC_p composites, because the particle-matrix interfaces in the composites act as effective sinks for vacancies. Creep tests have shown that the application of 2 thermal cycles lowers the creep strain rates in both pure Al and Al-SiC_p composites. However, the creep resistance of pure Al gets significantly deteriorated, unlike the mild deterioration in the Al-5 SiC_p composite, while the time to rupture for the Al-10 SiC_p composite is increased. The dislocation structure and subgrain sizes in the Al and in the matrices of the Al-SiC_p composites in the as-rolled condition, after thermal cycling, and after creep tests, have been compared and related to the creep behavior. The dimple sizes of the crept fracture surfaces appear to be dependent on the void density, tertiary component of strain, and time to rupture.     

Recent Books

This unique and interesting book covers technical aspects of antenna noise temperature for large antennas, such as those of NASA's Deep Space system, encountered during the author's 40+ year career there. It is a true engineering book that gets right down to details and does not entertain tutorials, so is not a quick read. However, it is well referenced: most of the references are available via the Internet, from JPL's Web pages, and IEEExplore, if needed. The work described covers the frequencies from 2 to 32 GHz, with few excursions outside this range.     

Preparation of diamond like carbon thin film on stainless steel and its SEM characterization

We report the formation of a very smooth, continuous and homogeneous diamond-like carbon DLC thin coating over a bare stainless steel surface without the need for a thin Si/Cr/Ni/Mo/W/TiN/TiC interfacial layer. As confirmed by the field-emission scanning electron microscopy, good adhesion is achieved as characterized by (i) the formation of a smooth, continuous film with no pores, (ii) a significant reduction of oxygen in the interfacial layer, and (iii) the development of rich carbon content at the top surface. Thickness measurements by cross-sectional secondary-emission microscopy showed that the DLC coating is essentially a 2-dimensional material.     

Modeling of the sheet‐molding process for poly(methyl methacrylate)

The sheet‐molding process for the production of poly(methyl methacrylate) (PMMA) involves an isothermal batch reactor followed by polymerization in a mold (the latter is referred to as a “sheet reactor”). The temperature at the outer walls of the mold varies with time. In addition, due to finite rates of heat transfer in the viscous reaction mass, spatial temperature gradients are present inside the mold. Further, the volume of the reaction mass also decreases with polymerization. These several physicochemical phenomena are incorporated into the model developed for this process. It was found that the monomer conversion attains high values of near‐unity in most of the inner region in the mold. This is because of the high temperatures there, since the heat generated due to the exothermicity of the polymerization cannot be removed fast enough. However, the temperature of the mold walls has to be increased in the later stages of polymerization so that the material near the outer edges can also attain high conversions of about 98%. This would give PMMA sheets having excellent mechanical strength. The effects of important operating (decision) variables were studied and it was observed that the heat‐transfer resistance in the mold influences the spatial distribution of the temperature, which, in turn, influences the various properties (e.g., monomer conversion, number‐average molecular weight, and polydispersity index) of the product significantly. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 1951–1971, 2001     

A preliminary pharmacogenetic investigation of adverse events from topiramate in heavy drinkers.

Topiramate, an anticonvulsant medication, is an efficacious treatment for alcohol dependence. To date, little is known about genetic moderators of side effects from topiramate. The objective of this study was to examine 3 single nucleotide polymorphisms (SNPs) of the glutamate receptor GluR5 gene (GRIK1) as predictors of topiramate-induced side effects in the context of a laboratory study of topiramate. Heavy drinkers (n = 51, 19 women and 32 men), 75% of whom met criteria for an alcohol use disorder, completed a 5-week dose escalation schedule to a target dose of either 200 or 300 mg or matched placebo. The combined medication groups were compared with placebo-treated individuals for side effects at target dose. Analyses revealed that an SNP in intron 9 of the GRIK1 gene (rs2832407) was associated with the severity of topiramate-induced side effects and with serum levels of topiramate. Genes underlying glutamatergic neurotransmission, such as the GRIK1 gene, may help predict heterogeneity in topiramate-induced side effects. Future studies in larger samples are needed to more fully establish these preliminary findings. (PsycINFO Database Record (c) 2010 APA, all rights reserved)